Hey Guys-
Do you know the stock Blaster wattage output? I'm looking to run one or two PIAA's, preferably about 40 or 50 watts apiece. I know 100 watts is too much to be stock and I would like to know if there is a place like Rickystator to get my coil rewound. Thanks!

 

now thats something i dont know. but i do know my friend has piaa foglights on his and they work great i dont think he did anything to it either.

 

If you Want to Run those kind of lights, besure to remove the stock light as well. But i do not think both lights will be powered by your stator to full power.

I installed i warrior lights 25w a piece, and they were dim. I think the stock bulb is 25w. Just use trial and error. Maybe you can attach a rechargeable battery to take care of the surges.

 

Thanks for the idea Blaster 96. I might do what you said and put a motorcycle battery under the seat and install a rectifier to have the stator charge the battery through 12v DC. I'm hoping its going to work

 

ya cause ricky stator don't make a hi-output for the blaster. i used 15 watt lights made for a bicycle on mine and they shined bright.