cams for warrior
#11
cams for warrior
Sounds like a good project ! I dont claim to be an expert but let me know if I can help - Here's one weird tool that really helped remove the inner cam bearing. I was at a loss until I found this thing. It may be a common tool for regular mechanics but being a novice I had never used a puller like this one.
Puller
Have fun and keep the little one busy with the project - if it's like my Warrior, it'll be around until he graduates High School [img]i/expressions/face-icon-small-happy.gif[/img]
Puller
Have fun and keep the little one busy with the project - if it's like my Warrior, it'll be around until he graduates High School [img]i/expressions/face-icon-small-happy.gif[/img]
#12
#13
cams for warrior
Wat the heck is the CORE??? I am doing a rebuild on my warrior. I am putting verything brandnew in my head cept for valves wich are in grear condition. Dennis kirk is selling cams for the warrior so ya might want to give him a call i am planning on it. I am also going to check out at a big dealer this week.
About that puller, did u have to pull very hard our would a piece of wire or just a bent piece of mettal work? thanx man
About that puller, did u have to pull very hard our would a piece of wire or just a bent piece of mettal work? thanx man
#15
cams for warrior
From the info I gathered, the Hot Cam does not have as much lift as the others - you can use stock valve springs. They claim more duration rather than lift.
The cam should just pull out of the head easily - screw the bolt that holds the cam gear back in and wiggle/pull on it. If you change the inner bearing you'll probably need some kind of puller.
The cam should just pull out of the head easily - screw the bolt that holds the cam gear back in and wiggle/pull on it. If you change the inner bearing you'll probably need some kind of puller.
Thread
Thread Starter
Forum
Replies
Last Post
Scooter's Shop
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
23
10-22-2015 07:04 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)