stock on the warrior is 13/40

a correctly burning plug should be a light tan color.

Be careful when you replace the plug .. I replaced mine with the reccomended D8EA and all the quad did was spit and sputter. I have a DR8EA in it (came with the bike) and it runs fine. Could be just a bad plug I guess.

 

ok y would u go up in the front and the bak it would b the same as stock......get the 15 tooth 4 like $6.99 at atvrockymountain.com and u will b suprised

 

If you went up by two teeth on the front and up by two teeth on the back you would actually have slightly higher gearing. The two teeth on the front make a much bigger differance than the rear.

I still like my idea of having a deraileur for the rear and perhaps 2 or 3 sprockets .. 38(-2) 40(stock) and 42(+2)

When you want speed select the 38, when you want takeoff and torque select the 42, for general riding leave it stock [img]i/expressions/face-icon-small-smile.gif[/img]