Can i bent the frame back?
#1
Can i bent the frame back?
I bent the frame on my raptor by hitting a tree how should i bent it back? I could heat it up and bent it or i can pull it in one direction and the other part in the opposite direction? how anyone? it is the part from the engine to the front a-arms on the bottom?
#2
Can i bent the frame back?
I dont know what you have in the way of tools but it you can lay it out and fasten it down a PORTO/POWER should move it around . No promises .
If you dont have the tools take it to an alignment shop that works on wrecked cars and such they could tell you if it's repairable . Good luck and watch out for trees
If you dont have the tools take it to an alignment shop that works on wrecked cars and such they could tell you if it's repairable . Good luck and watch out for trees
#3
Can i bent the frame back?
depending on where it is bent...I have used jacks, wedges...big pipes...the worst part is getting the frame secured enough to pry on it. Even then your probably going to stress some joints..etc.
A frame straitening shop for autos should be able to help you out.
where did you bend it?
A frame straitening shop for autos should be able to help you out.
where did you bend it?
Thread
Thread Starter
Forum
Replies
Last Post
bzdok1234
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
30
02-23-2016 01:55 PM
KimSJoh
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
14
07-18-2015 07:20 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)