then i have to have them out in right? i cant do that myself can i?

 

is there any way to thorghly clean the in side of my motor?

 

intake valves are $17.00 each for stock, not sure what exhaust run, ??

 

You can flush it a couple of times but there is no guarantee that you'll get every bit of metal out of the bearings and oil passages. Fill it with kerosene a few times and see how much crud washes out. You may be OK but there is only one way to find out, put it all back together and ride it. Worst case, you'll have to rebuild the motor anyhow.

 

[quote]
Originally posted by: UBETRUN
Fill it with kerosene a few times and see how much crud washes out.



how can i fill it with kerosene with the head and flywheel off?[img]i/expressions/face-icon-small-confused.gif[/img]

 

or if i put it back together how would i fill it?

 

aanyone?

 

put the side cover on and if the head is off just pour it down the passage for the cam chain, then drain it, next fill as much as you can through the oil tank, then do the case again and that will get alot of gunk out.

 

how can i make sure it gets in everything? like on the right side of the motor im sure i will miss places