Yamaha Discussions about Yamaha ATVs.

blaster still not running

Thread Tools
 
Search this Thread
 
Old Feb 16, 2005 | 04:55 PM
  #1  
nickynauw's Avatar
Thread Starter
|
Weekend Warrior
Joined: Feb 2005
Posts: 13
Likes: 0
Default blaster still not running

i have an 03' blaster with a alien pipe and k&n filter and holeshot tires anyway i was ridin it around and it just bogged down and shut off. i got it home and checked out my spark plug checked my piston cleaned my carb and cleaned my filter but it still dont run can anyone give me some sugestions please
 
Reply
Old Feb 16, 2005 | 05:00 PM
  #2  
NBake's Avatar
Pro Rider
Joined: Nov 2004
Posts: 377
Likes: 0
Default blaster still not running

what did ur spark plug look like when u took it out? did u try a new plug?
 
Reply
Old Feb 16, 2005 | 05:11 PM
  #3  
nickynauw's Avatar
Thread Starter
|
Weekend Warrior
Joined: Feb 2005
Posts: 13
Likes: 0
Default blaster still not running

yea new spark plug
 
Reply
Old Feb 16, 2005 | 05:23 PM
  #4  
NBake's Avatar
Pro Rider
Joined: Nov 2004
Posts: 377
Likes: 0
Default blaster still not running

what did ur plug look like when u took it out?as of right now, all i can think of is try new gas and check ur spark.
 
Reply
Old Feb 16, 2005 | 06:20 PM
  #5  
candyman72's Avatar
Weekend Warrior
Joined: Feb 2005
Posts: 5
Likes: 0
Default blaster still not running

is there a block in your fuel line ??? filter???
 
Reply
Old Feb 16, 2005 | 07:20 PM
  #6  
Fastblasterboy's Avatar
Pro Rider
Joined: Jan 2005
Posts: 317
Likes: 0
Default blaster still not running

Is your gas turned off?
 
Reply
Old Feb 16, 2005 | 08:18 PM
  #7  
nickynauw's Avatar
Thread Starter
|
Weekend Warrior
Joined: Feb 2005
Posts: 13
Likes: 0
Default blaster still not running

no the gas wasnt turned off, the plug was fouled when i took it out and i am putting new gas in tommarow
 
Reply
Old Feb 16, 2005 | 08:33 PM
  #8  
garrett5462's Avatar
Elite Pro Rider
Joined: Dec 2004
Posts: 5,193
Likes: 0
Default blaster still not running

reeds maybe?
 
Reply
Old Feb 16, 2005 | 10:49 PM
  #9  
blaster2002004's Avatar
Range Rover
Joined: Aug 2003
Posts: 159
Likes: 0
Default blaster still not running

When you tried to kick start it again did it have compression?? and when you checked the top end did you see any small peices of alluminum? Cause if you dont have any compression its more then likely a piston blown.. Other then that see if the reeds are all good and you might wanna see if your getting any air leaks anywhere near the carb.
 
Reply
Old Feb 16, 2005 | 11:10 PM
  #10  
Shav0's Avatar
Pro Rider
Joined: Jan 2004
Posts: 2,489
Likes: 0
Default blaster still not running

Could be the crank seal on the clutch side. When it goes it draws tranny oil in because the crankcase creats a vacuum. It would cause a problem similar to what you are experiencing, just imagine 10w30 getting in on the spark plug, it fouls quicker then you can change them. Pull the clutch cover off and check out the seal behind the primary drive gear that runs on the clutch, you should be able to see if anything was wrong with it.
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Frisky2050
Buying an ATV
10
Apr 9, 2020 11:19 AM
tpd270
Yamaha
7
Jul 5, 2015 10:38 PM
tpd270
Introduce Yourself
1
Jul 1, 2015 08:18 AM
Shooterj2003
Suzuki
3
Jun 21, 2015 09:02 PM
blazer316
Buying an ATV
3
Feb 27, 2001 01:28 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 



All times are GMT -5. The time now is 11:49 AM.