Raptor Choke
#1
I think that my choke may in out of wack, The thumb lever has alot of play in the cable, I ve adjusted it but still seem to be the same. Iam pretty sure that it is affecting the way it idles, seems to run fine, Could there be something holding the choke open or shut?
#2
disassemble it from the carb, all it reall yis, is a plug thingy, im not sure how it works, but take not, dont strip the black nut on the carb, its made of plastic. which your at it give everything a good cleaing with a bottle of carb cleaner(works miracles)
#4
Mine did that. i took out the cable and the black screew thing off the carb where the cable goes in, and take out the little plunger and clean it and where it goes into, make it so it can slide in and out pretty easisly...
#5
The spring might have corroded too located with the plunger at the carb. When I had my 2001, you couldn't get the spring without buying the plunger. I just went to the hardware store and bought a spring. Had to cut a few coils from the spring but it worked fine. Was less than $1 instead of like $27 if I remember correctly.
/jon
/jon
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)




