getting a quad
#5
#6
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
Check all fluids. Make sure they are at proper level and smell and look correct. Like the oil shouldn't be foamy or excesivly black as this could mean water in oil or that they didn't take very good care of it. Look at the frame and make sure it doesn't look like its been rewelded or cracks, etc. And like Boombotz said give it a good test ride and listen for any adnormal sounds and see if it feels right.
#7
Trending Topics
#8
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
Push down on the front and back suspension and test the rebound on the shock... Pull on the front A-arms and see if the bushings are showing signs of ware... Do the same to the rear swingarm.... Check the carrier bearings by sitting on the quad and rock it back and forth and look at the axle housing.... Look at the under side of the quad as well....
Thread
Thread Starter
Forum
Replies
Last Post
Frisky2050
Buying an ATV
10
04-09-2020 11:19 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)