how to got more power out of my blaster...anyone please help!
#22
how to got more power out of my blaster...anyone please help!
I would start with an exhaust (used on ebay or from a salvage yard or another blaster owner who changed pipes)
then get a K&N filter I only paid about $60 for mine sometimes you can find one used that just needs cleaned and recharged for cheap.
Then drill the holes in your airbox and get a Dynojet jetkit for it so you dont run too lean and blow something up.
then get a K&N filter I only paid about $60 for mine sometimes you can find one used that just needs cleaned and recharged for cheap.
Then drill the holes in your airbox and get a Dynojet jetkit for it so you dont run too lean and blow something up.
#23
how to got more power out of my blaster...anyone please help!
I'd forget the dynojet kit. (any jet "kit" for that matter) You can buy jets from any good dealer for about 2-3 bucks apiece. If you do some searching on here and other Blaster sites, you can get a good idea of where to start with rejetting, then do plug chops to get it spot on. All for about 10 bucks or less.
#24
how to got more power out of my blaster...anyone please help!
Advance the ignition 4 degrees for a little more low end power, and its free. Here is a link to a article on how to do it.
Advance Ignition
You may check out Project Blaster, Blaster Riders, AirCooled Racers, or Everything Two Stroke for a used pipe for a Blaster
Advance Ignition
You may check out Project Blaster, Blaster Riders, AirCooled Racers, or Everything Two Stroke for a used pipe for a Blaster
#25
how to got more power out of my blaster...anyone please help!
Oh, I forgot all about PB lol.
If you still want help or anything, or want to meet some cool people who can help ( some more than others, lol ), go to Project Blaster. There's also a store if you wanna buy anything. [img]i/expressions/face-icon-small-wink.gif[/img]
www.projectblaster.com
Hope I helped [img]i/expressions/face-icon-small-wink.gif[/img]
If you still want help or anything, or want to meet some cool people who can help ( some more than others, lol ), go to Project Blaster. There's also a store if you wanna buy anything. [img]i/expressions/face-icon-small-wink.gif[/img]
www.projectblaster.com
Hope I helped [img]i/expressions/face-icon-small-wink.gif[/img]
#28
I bought a 97 blaster not to long ago for a project bike.
I got a 440 ex for my everyday rider.
I have an FmF, boysen reeds, k&n air filter, jetted and runs without air box lid. It's awfully quick for a 200. It'll take a 300ex no problem "it's been done " lol but keep in mind it's still a blaster and it isn't gonna give you the performance the 400s and 450s will
I got a 440 ex for my everyday rider.
I have an FmF, boysen reeds, k&n air filter, jetted and runs without air box lid. It's awfully quick for a 200. It'll take a 300ex no problem "it's been done " lol but keep in mind it's still a blaster and it isn't gonna give you the performance the 400s and 450s will
Thread
Thread Starter
Forum
Replies
Last Post
MeadowlarkFarm
Test Your Signatures (sigs) Here!
3
11-27-2019 08:40 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)