I was riding my 660 rhino when it just stops. It does not have any fire to the plug. I have checked and dont have any power to the coil. Any suggestions?

Ok checked it with a meter.... i am have a pulse on the wiring harness side... but nothing through the coil? Could it be a bad coil?

 

If you have an aftermarket CDI box get a new one, same thing happened to our 06 so i put a new Dynatek CDI in it and it fired right up. Ours would start with the bad CDI but only when you let off the key.

 

Figured it out.... its the stator... have a new one coming. Unplugged the regulator and it starts.... Thanks