well i replaced the cdi i replaced the stator i replaced the coil i replaced the pickup coil now when i use the push button start switch it only sparks when you take your finger off the button i tried jumping the starter solonoid i eveb tried jacking the rear wheels i put it in high gear and spun the tires again no spark i check everthing over and still didnt get it going if anyone has any ideas please let me know

 

i went back and checked with my meter and found the source coil at 230 ohms the minumum spec is 270 the other one i have is 285 i found the pick up coil at 180 the ignition key switch checks out with the continuity test the electronics are off of a 96 and i have them on a 95 and they all came off of a running machine wire color code was the same just had to change the conectors

 

Im working on some solutions for this problem Ill post as soon as i find something, right now Im checking all these cheesy wires routed throught the beast of a mess. RP