Parking brake limiter/ Reverse limiter?
#11
when i pulled my parking brake off it would only putt around at about 1/2-3/4 throttle. I was so baffled by it cause i just cleaned my carb out. My mechanic had to reroute something to detour the sensor. Im looking to just take the whole thing off and get an aftermarket perch but i dont know if that will cause more headache.
#13
No, I un plugged the white plastic plug with 2 wires in it and, un plugged the other 2 black wires coming out of the bottom of them and, jumped them together. still not working. I'm pretty sure it is a rev limiter because it starts in 1 second, runs forever and, revs without hesitation for about 500 RPM till it starts to ding ding ding hit a limiter. I plugged everything back together and cleaned the crap out of the depressors that plug into the perch (horribly dirty) and, still no change. I think the wires you are saying to look for are in the back of the Raptor near the battery and, not up by the radiator. I'm lost.
Ppl have to change the combo clutch PB perch all the time. I know that this had to be done 1000's of times - why am i having such issues? I'd love to eliminate the whole thing and, be done but i need to get it to run right someway and, then elkiminate the PB.
Thanks for any help.
Ppl have to change the combo clutch PB perch all the time. I know that this had to be done 1000's of times - why am i having such issues? I'd love to eliminate the whole thing and, be done but i need to get it to run right someway and, then elkiminate the PB.
Thanks for any help.
#15
#17
I live in the south burbs of Chicago. OakForest, Il.
I'm having a hard time with this being such a difficult thing. I've seen and, heard of lots of ppl changing out bars and, perches and, when at not. I just need to know the trick to getting rid of the limiter switches.
Is Ubeterun still around? He knew a lot about raptors, I know he would be able to help.
I'm having a hard time with this being such a difficult thing. I've seen and, heard of lots of ppl changing out bars and, perches and, when at not. I just need to know the trick to getting rid of the limiter switches.
Is Ubeterun still around? He knew a lot about raptors, I know he would be able to help.
#18
Thank you for the help!
I just wanted to say thanks to all that helped! after playing the disconect the wires game i fianlly played around with the reverse wire plug behind the shifter. I popped it off and, dirt and, sand came out. I cleaned the plug and, shaft it goes on with brush and, brake cleaner = started it up and, it is good as new!
Still not sure how i will ever figure out how to ditch the stock perch for just a clutch but i'll just make due with it till i feel like driving myself nuts again!
Thanks a lot!
Still not sure how i will ever figure out how to ditch the stock perch for just a clutch but i'll just make due with it till i feel like driving myself nuts again!
Thanks a lot!
#19
I just wanted to say thanks to all that helped! after playing the disconect the wires game i fianlly played around with the reverse wire plug behind the shifter. I popped it off and, dirt and, sand came out. I cleaned the plug and, shaft it goes on with brush and, brake cleaner = started it up and, it is good as new!
Still not sure how i will ever figure out how to ditch the stock perch for just a clutch but i'll just make due with it till i feel like driving myself nuts again!
Thanks a lot!
Still not sure how i will ever figure out how to ditch the stock perch for just a clutch but i'll just make due with it till i feel like driving myself nuts again!
Thanks a lot!
Thread
Thread Starter
Forum
Replies
Last Post
Njrider1230
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
6
07-29-2023 05:16 AM
house1
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
3
08-09-2015 10:49 PM
Stirling
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
4
08-09-2015 01:49 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)