Lonestar or DuraBlue?????
#11
My Durablue Eliminator,$289 came in a box marked Banshee, Blaster, Raptor With the stock axle out on the ground next to the Eliminator you can obviously see that it is offset differently than the stock axle. By using the shims that came with it, you can offset one side more than the other to even it out on the Raptor.
..........But that is kinda cheesey if you ask me.
Get the Lonestar for the RAPTOR ! 'cause you can wind up with a lonestar banshee axle if you aren't careful.[img]i/expressions/face-icon-small-disgusted.gif[/img]
..........But that is kinda cheesey if you ask me.
Get the Lonestar for the RAPTOR ! 'cause you can wind up with a lonestar banshee axle if you aren't careful.[img]i/expressions/face-icon-small-disgusted.gif[/img]
#13
#14
NotuRaptor,
I called LSR and they said the Banshee axle is LS-Y1 and the Raptor is LS-Y3 and LS-Y4. I should have asked if the Y3 and Y4 were different lengths.
Bash,
Thanks for the measurements. It sounds like yours is definitely centered. Maybe my measurements were a little off, since my numbers were close to that.
I called LSR and they said the Banshee axle is LS-Y1 and the Raptor is LS-Y3 and LS-Y4. I should have asked if the Y3 and Y4 were different lengths.
Bash,
Thanks for the measurements. It sounds like yours is definitely centered. Maybe my measurements were a little off, since my numbers were close to that.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)