due to some past wrecks [img]i/expressions/face-icon-small-sad.gif[/img] my handlebars have become quite weak. im looking for some stronger aftermarket bars but i like the stock bend. im looking for the handlebars that are as close to stock as possible. i cant find any WARRIOR BEND handlebar anywhere. ive seen other atv bends but no warrior. please help me out. the sooner the better. thanks a lot!

 

I am used to the stock handlebars on my Warrior also but the bend on the handlebars aren't really the best. They want to make you ride sitting down. That is why no aftermarket company will make a bend the same as stock. You will have to get another set of stock bars to have that bend.
You can bend a set of aftermarket handlebars just as easy.

 

what bend do ya'll recomend? i kno that i dont want any real low and wide handlebars and i really dont want no ape hanger style handlebars either. please help me out a little bit. thanks again.

 

Take the bars off and take them to a dealership and compare them to what they have. You might find something good.
Ape hangers on a Warrior. Would that be a trip or what. I should take the apes off my Harley and mount them up. Then show up at Pismo for the sand drags.[img]i/expressions/face-icon-small-happy.gif[/img]

 

I have Fly handlebars with the 400ex bend. I find them to be close to stock warrior bend but feel a little better. It took me 3 or 4 laps on the track to get used to them, but it didn't take long.

 

According to the Rocky Mountain catalog, Renthal lists a bar for the Warrior. It has the same bar listed for the the 88-01 Blaster, the 87-01 Banshee, and the Raptor. The width is 30.51", height is 5.90" and the pullback is 3.93".

I am not sure how this relates to your factory bend though. Hope this helps.

 

try some Tag bars I had some on my warrior and loved them

 

IF I WAS YOU I WOULD GO WITH SOME CHEAP RENTHALS THAT WOULD HOLD UP 5 TIMES MORE THAN YOUR STOCK BARS. DON'T WORRY ABOUT THE BEND, THEY'LL BE CLOSE!