It's not that it vibrates more, those are the shock waves of the sonic boom your about to hit with a 720. LOL [see, I too can show the raptor some respect, not much, but some]




<< Some very good posts. I am sorry to hear that Knutz cannot let go of the past and is still bitter. Remember Knutz, I do not start things, but I do finish them. If you want to act like a jr. high kid and hold a grudge for the rest of your life, so be it. When someone presses my buttons, I come back and press them full-on. I let your foul mouth and personal attacks go in one ear and out the other, and I am not mad, it is unfortunate that you still are. I will extend a hand to you at the next 4-Stroke Wars, if you are not accepting that, then so be it. For future usage please leave references to me out of your posts, as I do not post negative references about you (unless in response). Get the picture? >>



Who can't let it go? I didn't mention your actual name, just as I never actually posted a foul word. Each word of the post your referring to was carefully chossen to not be prohibited. If it goes in one ear and out the other, why the paragraph trashing me again. What is it about my last post that can be concieved as negative? I'm not the least bit mad either, but then again, you definately have some issues. I won't get into one of your third grade style attacks again, but I'm sure you won't let this rest. Just as I would expect from a third grader, you'll have to get the last word in. It's good to know that I press your buttons, you got to mine once, and then I moved on. Go ahead and &quot;finish them&quot; now, I know your dieing to. I've moved on, and will not respond to whatever your reply is.

I would say that it's people like Kingraptor that keep builders from posting more than they do in here, but it's not people like him, it's just him.

 

I'm going to TRINITY today with my cylinder, cylinder head, and credit card! Na, na, na-na, na!!!!!!! [img]i/expressions/face-icon-small-happy.gif[/img]

 

the amount of knowledge that i have seen in some of the posts on this thread is amazing. SOME of you guys really know your stuff while some just pretend. let the pretenders do just so. as an average weekend warrior i appreciate the guys who are willing to intelligently and consturctively inform me of the dos and don'ts of ATV mechanics/tuning. there is a lot to be said of someone who uses thier knowledge with civility. they deserve my thanks.

 

Anybody with the 686 have any dyno results? Since there are so many 686's around now, I would think there are some dyno results? Not just numbers, Dynojet files would be good, I am just updating my website and am looking for dynorun files to put up on the site. The viewer is free on Dynojet's website. Thanks in advance!

 

Thanks King! The only problem is that I can't decide on the 103mm/valve combo or the 105mm/valve combo requiring higher octane. Not a bad problem to have though [img]i/expressions/face-icon-small-wink.gif[/img] It was a fun and educational morning and I will post later on my visit to Trinity. (800R...I'll never tell!)

 

Wshrdskin- I called the dyno numbers listed. The man called back. We are setting up a dyno day at my mx track on May 11th. He has a 2 hour min. at a reasonable price. I have already lined up 5 raptors and a shee. Can't decide if i should invite the sand pigs to participate. I will post the numbers the 11th. I want to see! Thanks again!


Knutz- I saw a post of yours a long time ago, with FOUL language. You went back in and really, really re edited it. You and the King were going back and forth.

 

Excellent 14. Glad to have helped. Please do share when your numbers come in. [img]i/expressions/face-icon-small-smile.gif[/img]

 

ok I cant take it any more, I am convinced my yamaha dealer did a lousy job on my polish and port, if they did it at all, after speaking to harry, I am sending in my head for a pro-port with chamber mods and oversize intake valve, he was kind enough to offer to reduce the price if some of the port work had been done, good to be working with professionals

 

Do you guys notice that TEAMSPARKS and Mickey Dunlap have not said a word with all of the confrontation! Trinity and Raptor720 gave them a fair challenge and they backed off! Geez Hmmm let's see here who would I rather spend my 3000 dollars with company's like FST that admits to having a customers motor for 8 months when promised 3-6 weeks and basically said &quot;So what we have your money and I will get it done whenever I feel like it.&quot; And have the ***** to say &quot;Are you going to keep a grudge forever?&quot;

And then we have TEAMSPARKS saying we have the fastest 690 (686's) on the planet! I won't prove my numbers on the dyno but I will race you! Come on if your motors are so good you should tear up the dyno and make trinity look bad and take all of their buisness. Sounds to me that we have a bunch of guys having a pissing contest and two of the members of the competition have cocktail weiners!

I am sorry I couldn't resist!

 

I see the dyno challenge like a poker game why would you show your cards before the end of the game!The end of the game being the next fourstroke wars.Are we bluffing you make the call show up at the next race and find out!And as for taking buisness we are extremely busy now!Lyle