Yamaha Discussions about Yamaha ATVs.

banshee wheel has a little play in it??

Thread Tools
 
Search this Thread
 
  #1  
Old 08-12-2002, 06:15 PM
RIDEORDIEYZF's Avatar
Pro Rider
Thread Starter
Join Date: Feb 2002
Posts: 218
Likes: 0
Received 0 Likes on 0 Posts
Default

I've noticed that my 89 yamaha banshee frt wheels have a little play when i wiggle them back and forth... I don't if this is a common thing with the crappy j-arms or what.. does anyone know whats wrong?? Thanx
 
  #2  
Old 08-12-2002, 07:05 PM
desracers's Avatar
Pro Rider
Join Date: Aug 1999
Posts: 1,106
Likes: 0
Received 0 Likes on 0 Posts
Default

Sound like the ball joint is worn out.....
Which mean is new a-arm replacement.... Time to go shopping for a replacement.

Also see if the tie rod is loose, tie rod ball joint too.....
 
  #3  
Old 08-12-2002, 08:21 PM
RIDEORDIEYZF's Avatar
Pro Rider
Thread Starter
Join Date: Feb 2002
Posts: 218
Likes: 0
Received 0 Likes on 0 Posts
Default

o thanks, can u just replace the ball joint or do i have to buy a whole new top j-arm w/the ball joint.. also do u know where any sites that sell j-arm replacments.
 
  #4  
Old 08-12-2002, 09:29 PM
desracers's Avatar
Pro Rider
Join Date: Aug 1999
Posts: 1,106
Likes: 0
Received 0 Likes on 0 Posts
Default

Well the stock you just have to replace the whole a-arm not the ball joint. Which is the pity...

The aftermarket replacement a-arm, They are several places. One is Lone Star, Look into the dirtwheel mag. and see what they have on the ad. Also you might want to try out on E-bay and see who is selling of the J-arm.

Also look in to local paper ad too.

Good luck.
 
  #5  
Old 08-12-2002, 11:19 PM
rancherman350's Avatar
Trailblazer
Join Date: Aug 2001
Posts: 82
Likes: 0
Received 0 Likes on 0 Posts
Default

dont replace the ball joint! I would take a look at your front wheel bearings before u go and replace your j-arms!
Your ball joints shouldnt go bad unless you really beat the crap outta it. So look at the wheel bearings first lol it would be a lot cheaper then j arms
 
  #6  
Old 08-15-2002, 01:30 PM
RIDEORDIEYZF's Avatar
Pro Rider
Thread Starter
Join Date: Feb 2002
Posts: 218
Likes: 0
Received 0 Likes on 0 Posts
Default

OK this is weird. I just greased all j-arm bushings throught the little zerks and the wheels don't wiggle anymore. but i don't think hthere is anything wrong w/the bushngs cause i just replaced them like 3 months ago.. is there normally a wiggle in these bushings??
 
  #7  
Old 08-15-2002, 01:37 PM
bansheeguru's Avatar
Range Rover
Join Date: Jan 2002
Posts: 155
Likes: 0
Received 0 Likes on 0 Posts
Default

Were the bolts slightly worn if you have a slight bit of wear the grease will fill the play and it wont wiggle until you ride again.but I would also check the wheel bearing for play aswell
 
  #8  
Old 08-15-2002, 02:42 PM
DennisC's Avatar
Range Rover
Join Date: Oct 2001
Posts: 161
Likes: 0
Received 0 Likes on 0 Posts
Default

I just had to buy factory O.E.M j-arms for the front of mine. It cost me over 300.00 dollars. Good luck finding aftermarket ones, all I could find was companies that wanted to sell me conversion kits to a-arms. I would personally stay away from used parts, on something like this if you buy it used its probably pretty close to being worn out too, since there all goin to be about 12 to 13 yrs. old. Good Luck and have a great ride!
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
John Reed
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
1
09-09-2015 03:46 AM
bmark0610
General Chat
1
09-07-2015 09:42 PM
Jason Campbell
Honda
0
09-07-2015 02:25 PM
twon1235
Utility ATVs
2
09-07-2015 04:38 AM
oliveiracarlos
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
0
09-07-2015 03:39 AM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: banshee wheel has a little play in it??



All times are GMT -5. The time now is 10:13 PM.