how to make a warrior fast!!!
#1
#3
#4
#5
#6
#7
how to make a warrior fast!!!
You could always drop the Warrior from a C130 at 10,000 feet. Fast, very fast... Okay, with minimal cash. Aftermarket pipe (supertrapp, alba, FMF) Drill 6+ 1" holes in your airbox lid, rejet the carb or buy the 36mm mikuni from Alba. Drop in the .390 lift webcam and add a high compression piston ( go with an overbore not a drop in ) For a sum of under $600 you can make it much faster. If you want a super low buck mod remove the baffle from your stock pipe and open up the airbox and rejet. Good improvement for under $10.
Trending Topics
#8
how to make a warrior fast!!!
Port it completely, put in bigger valves with better springs, .450 cam, ton of compression on alcy carb, call FST and have them hook you up with 450-500ccs. Then toss in a boondockers nitrous system. Add a better clucth and if eveything holds together you can hit mach 1. \
If you want cheap, the Ablba cam and piston kit (lil over 400 bucks) mixed with some porting will yield ~30hp. As will the FWT kit for around the same price.
If you want cheap, the Ablba cam and piston kit (lil over 400 bucks) mixed with some porting will yield ~30hp. As will the FWT kit for around the same price.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)