what aftermarket parts or modifications can be done to make a warrior very fast?

is there a big bore kit, cam, exhaust, upgraded valve train carbuerator or what?

 

remove seat...slide a raptor under old seat...reinstall seat...your done!! [img]i/expressions/face-icon-small-tongue.gif[/img]

 

In the July 2002 edition of ATV Action they had a ALBA Warrior 400. It boost the HP from around 18hp up to 29/30hp. ALBA 400cc Stroker kit for $1350.

 

i see in your sig you have a blaster, is the blaster much faster than the warrior?

 

hmmmm...to be honest...im not sure! but the blaster is way more fun to ride...the warrior is kinda like a tank. Most guys buy em for there wives to ride [img]i/expressions/face-icon-small-wink.gif[/img]

 

CALL FOUR STROKE TECH. THEY DO A I BELIEVE IT WAS A 7MM STROKER THAT IS VERY FAST. I HAVE A FRIEND THAT OWNS AN ATV SHOP AND HE PUT ONE TOGETHER FOR A GUY AND IT WAS FLAT OUT AWESOME

 

You could always drop the Warrior from a C130 at 10,000 feet. Fast, very fast... Okay, with minimal cash. Aftermarket pipe (supertrapp, alba, FMF) Drill 6+ 1" holes in your airbox lid, rejet the carb or buy the 36mm mikuni from Alba. Drop in the .390 lift webcam and add a high compression piston ( go with an overbore not a drop in ) For a sum of under $600 you can make it much faster. If you want a super low buck mod remove the baffle from your stock pipe and open up the airbox and rejet. Good improvement for under $10.

 

Port it completely, put in bigger valves with better springs, .450 cam, ton of compression on alcy carb, call FST and have them hook you up with 450-500ccs. Then toss in a boondockers nitrous system. Add a better clucth and if eveything holds together you can hit mach 1. \

If you want cheap, the Ablba cam and piston kit (lil over 400 bucks) mixed with some porting will yield ~30hp. As will the FWT kit for around the same price.