panther 150md transmission?
#11
that is how this one is. when the shift lever is fwd,the rear lever is back into the "relaxed" position. When the shift lever is pulled to the back,the lever on the rear goes fwd. I guess there is no pushing this heavy brute in neutral then..lol
I will get time to work on it tmrw and see if I can get the tranny to not engage the chain if she cranks up for me.
I will get time to work on it tmrw and see if I can get the tranny to not engage the chain if she cranks up for me.
Id pull the cvt cover off and watch stuff as it runs...
#12
got the carburetor on. little massaging and she started up. once the idle was adjusted, I shifted it back n forth from fwd and reverse,using the brake to stop the rear tires between shifts(atv was on blocks in the rear). Few easy shifts and she is working great.I will finish buttoning up the loose ends tmrw and giver her a run thru the yard.
#15
any suggestions because I had it cranking freely a few hours ago. I had the rear wnd on a block,front n rear brakes applied and she turned over strong n fired right up.
put the nose cover back on,buttoned up some loose ends and now nothing.will not start and the rear tires r moving again.
if I apply the rear brake lever,that chugs the engine down because its trying to stop the rear tirees from turning.
think im done for the day. ill take the cover off tmrw. not sure how long this thing has sat but everything on it still works. and its not weathered hardly any
put the nose cover back on,buttoned up some loose ends and now nothing.will not start and the rear tires r moving again.
if I apply the rear brake lever,that chugs the engine down because its trying to stop the rear tirees from turning.
think im done for the day. ill take the cover off tmrw. not sure how long this thing has sat but everything on it still works. and its not weathered hardly any
#17
#19
wanted to update this.
took the cover off and it was working fine.
more i messed with it better the atv got. once u locked down both brakes so it wouldnt walk off,it would start right up. had some bounce to it like it was wanting to run but after riding it and loosening years off sitting up,she is doing fine and the new owners are having a ball on it.
dont care for that weird design but this one was the fastest 150cc so far i have had here
took the cover off and it was working fine.
more i messed with it better the atv got. once u locked down both brakes so it wouldnt walk off,it would start right up. had some bounce to it like it was wanting to run but after riding it and loosening years off sitting up,she is doing fine and the new owners are having a ball on it.
dont care for that weird design but this one was the fastest 150cc so far i have had here
Thread
Thread Starter
Forum
Replies
Last Post
Jeff Roper
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
1
02-01-2022 11:48 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)