250 2x4 plastic problems
#11
250 2x4 plastic problems
The rivets tend to lossen w/ miles.Try drilling the old out .Iinstall a new one with some STRUCTURAL silicon....works a bit better than the reg stuff but the other stuff is OK.You may also want to drill a few extra holes and install Black plastic license plate screws.
If you dont have the rivet gun for the cat rivets try 2 pair of pliers .One to hold the rivet in place and one to grasp and lever(off the other pliers) the pin out till it snaps.
If you dont have the rivet gun for the cat rivets try 2 pair of pliers .One to hold the rivet in place and one to grasp and lever(off the other pliers) the pin out till it snaps.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)