well i give that nitro z520 with a 80 lb rider props, he was fast.......... HEY IS IT SCARY TO JUMP 2-3 FEET ON A SNOWMOBILE???????, LAST WEEKEND AT THE LAKE I WAS 5 FEET UP IN THE AIR OFF OF A 3 FT WAKE, GOOD JOB ON YOUR 3 FT JUMP, I WOULDNT SHOW THAT IF I WERE YOU.......do you want to have a jumping contest???? i will ride my sons BIG WHEEL you ride snowmobile...

 

I know that you guys run against each other, but perhaps you have never really raced or maybe never run uphill, but my goal in jumping an obsticle on a track is usually to jump as low and flat as I can to get back on the ground quickly to start powering forward again. My speed can only increase when my track is touching the ground and throttle is on. I also like the ability to setup for the next corner or jump, which I can only do with my skis on the ground.

sorry if Im not a showdog, but I need the points, not the magazine shots.
when running a sponsored sled, I will air the final jump at the checkered flag for their pictures and publicity, not for mine.

 

All b@ll breaking aside, that is a valid point you have there Chris i guess you are a pro [your sponsored] so you would know better than i would about snowbikes, that would make sense if running at the speeds of 71 MPH, what place did you take in finals? i have the same thoery when desert raceing, when i hit a deep set of whoops pegged in 5th at around 75 mph i bring the front end up and skip across the top with back wheels on ground as much as possible.. whats up with that turbo sled motor in my quad frame??, can you cut me a deal on it and sposor me possibly??? do you think that would edge out my competition?? how much for the motor and set up installed?? can you sponsor some of your engineering skills??? you would know how to set the clutch @ what RPMs to engage...Tony told me a price and i will do it if you help with intallation, i will donate one of my quad frames and sponsor myself and then write it off...lets do it!!! how many hp and ft lb torque will you have for me??you can race it too if want. comeback

 

I though the ds was a single?[img]i/expressions/face-icon-small-confused.gif[/img]

 

cueball, if you have a DS go look at the motor and let me know if you only have one spark plug and if you do i will give you a $100 if your ds 650 only takes one plug!!!!!!!!!!!!!!!


I be layin down a roostin on you and your neighbors childrens, childrens, grandchildrens, friends, cousins, brothers, sisters,half sisters friends embryo!!!!!.,,,,,,,,,,,,,,LOL and throwin a roost 70 feet back with 12 paddles.

 

shouldn't he give you $200 if there is two?

 

Sorry, im not familiar with the ds. Ive never seen that design before. Ill have to look at one more closely when i find one. Is this a more effient spark because the cylinder is so big? HA I learned something today.[img]i/expressions/face-icon-small-happy.gif[/img]
thanks
PS it prairie 650 have to change that.

 

Can i have the 100 any way?[img]i/expressions/face-icon-small-shocked.gif[/img][img]i/expressions/face-icon-small-tongue.gif[/img][img]i/expressions/face-icon-small-smile.gif[/img][img]i/expressions/face-icon-small-wink.gif[/img][img]i/expressions/face-icon-small-happy.gif[/img]

 

annihilator-
got a picture of what you want

had some time to fiddle with it

cant post it on this weak forum

snowest uses the same forum design except with pictures