Hi.
I know that the T2 bars will fit any 1 1/8 clamp, but is there a TAG clamp for the DS? Will that from 400EX fit? -> LINK
And will my stock handguards fit the T2 bars?

I live in Moscow, Russia and everyone here has Renthal or Magura bars. So I just want to have somethng different [img]i/expressions/face-icon-small-smile.gif[/img]

Thanks!

 

try trail tech

 

They have an adaptor kit for them, will raise the bars close to an inch.

 

agurez welcome to the forums.

 

I have the T2 bars on my DS, but I have the Trail Tech bar mount. They work just fine but feel a little wide, maybe its just me, it didnt take long for me to adjust to the difference. The extra width makes it a little easier to turn also.

 

Heres a pic with my set-up. I have a baldwin stem with the oversize clamps but to run a stock stem with T2 bars you need universal big bar clamps which are also shown in the pic.

Pic.. click here

What handguards do you have?

 

Thanks, I think I`ll get the Trail Tech. Looks cool.
The problem is I have to order everything from companies in Moscow, so it`s better to order from as less different sites as possible. Otherwise it gets too expensive [img]i/expressions/face-icon-small-smile.gif[/img]

RoughRider01, I have stock Baja handguards.

atvaddict01, thanks! I`ve been reading the forums since 6 months or so and learned a lot! You guys seem to know everything [img]i/expressions/face-icon-small-wink.gif[/img]

 

I have a pic off the trailtech bars installed on my DS in my pic's

 

Looks really sweet!
I`ll certainly get the clamp. Just have to decide between Trail Tech/TAG bars [img]i/expressions/face-icon-small-happy.gif[/img]

 

Stock baja handgaurds wont fit 1 1/8" bars. Well they could if you did alil work to get them to fit. The lower clamps, the ones near the bar clamps are too small, they dont quite reach around the bars. Also on some big bars they taper off the end of the bars where the grips are. The bar end clamp is too big to fit in the hole.