Tao tao 110 atv no sparky sparky
#1
Tao tao 110 atv no sparky sparky
Everything electric is brand new. Stator. Starter. Cdi. Rectifier. Battery. Coil.
No spark at all. Cranks fine and strong. Remove kill wire from cdi harness and still nothing. I get signal from red/black wire on harness side but nothing to yellow and black (cdi-coil)
No spark at all. Cranks fine and strong. Remove kill wire from cdi harness and still nothing. I get signal from red/black wire on harness side but nothing to yellow and black (cdi-coil)
#2
#3
Start measuring with a multimeter to find the fault, crank it while measuring the wires from the stator, if there's sufficient output the stator is good.
Crank it while measuring the voltage from the CDI to the coil, if sufficient output the CDI is good.
Crank it while measuring the coil etc.
You'll quickly find the problem and see if it's a bad part or just faulty installment.
Crank it while measuring the voltage from the CDI to the coil, if sufficient output the CDI is good.
Crank it while measuring the coil etc.
You'll quickly find the problem and see if it's a bad part or just faulty installment.
#4
#5
Start measuring with a multimeter to find the fault, crank it while measuring the wires from the stator, if there's sufficient output the stator is good.
Crank it while measuring the voltage from the CDI to the coil, if sufficient output the CDI is good.
Crank it while measuring the coil etc.
You'll quickly find the problem and see if it's a bad part or just faulty installment.
Crank it while measuring the voltage from the CDI to the coil, if sufficient output the CDI is good.
Crank it while measuring the coil etc.
You'll quickly find the problem and see if it's a bad part or just faulty installment.
#6
#7
Trending Topics
#8
I have a 110 cc tao tao that wont crank or do anything the crazy part is that even when i unplug the cdi and the regulator the wires stay hot.if anyone has detailed pics of how they hooked theres up id be greatful i just want to make it run i dont care about lights or saftey switches just want to hook wires from my stator cdi and soleniod. Please help thanks in advance
Thread
Thread Starter
Forum
Replies
Last Post
ATVC Correspondent
General RUV / UTV Discussion
3
05-19-2016 12:54 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)