Msd on the Prairie ?
#1
Msd on the Prairie ?
I seen where MSD sells an adjustable ignition module for 2 cyl motorcycles. I wonder if it would be possible to
piggy back the factory pickup and wire it into the MSD? Unhook the coils from the fac CDI and use the MSD. The pickup would still be wired to the CDI and the speedometer,eng brake and 4x4 would still work.
piggy back the factory pickup and wire it into the MSD? Unhook the coils from the fac CDI and use the MSD. The pickup would still be wired to the CDI and the speedometer,eng brake and 4x4 would still work.
#2
Msd on the Prairie ?
Hammerman,
Good question and I have no idea what the answer is. I would think that there is a coil out there that would work though. Here are the specs for the Coils on the '02 P650 and I assume the MSD would need to fall with in these criteria to be an option.
Coil Specs:
3 needle arcing distance 7 mm or more
Primary winding resistance 0.09 ~ 0.13 Ohm
Secondary winding resistance 3.8 ~ 5.8 kOhm
Primary peak voltage 100 V or more
Peace,
Sgt_Rock
Good question and I have no idea what the answer is. I would think that there is a coil out there that would work though. Here are the specs for the Coils on the '02 P650 and I assume the MSD would need to fall with in these criteria to be an option.
Coil Specs:
3 needle arcing distance 7 mm or more
Primary winding resistance 0.09 ~ 0.13 Ohm
Secondary winding resistance 3.8 ~ 5.8 kOhm
Primary peak voltage 100 V or more
Peace,
Sgt_Rock
#3
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)