Has anyone installed a Dayco P700 belt on a 03 P650? The Dayco P650 belt is a litlle longer than the P700.

 

I'm running the Dayco belt for a V-Force on my P650. Model #HP2017. Works like a charm.

 

Thanks for your help warrior, have you ever considered the DG3, I'M thinking real hard about getting one along with the Twin air Filter and jet kit.

03 Prairie 650 STOCK

 

I would love to have a DG3, but since I'm short of cash at the moment... I bought a used Holeshot module. Difference being it's low-end only, instead of a full-range device. But that's really what I'm interested in. Watch out for that "modification bug" - it's contagious!

 

Sorry about calling you warrior, I'm new at this forum stuff. Where did you buy your jet kit? Is your drilled muffler from NYROC'S? Could you tell a difference?

 

Not a problem! But now I'm a trailblazer instead of a warrior. lol.

I didn't buy a jet kit. I ended up placing two #4 size washers under my carb needles to richen it up a bit at idle. Most people go with Dynojet needles because they are adjustable (which would be nice!). But I'm cheap! [img]i/expressions/face-icon-small-smile.gif[/img] I picked up the jets I needed at my local dealership for $2.40 each. I did notice a difference from the drilled muffler, too. After the jets, muffler & snorkle (made out of 2" pvc) I raced a stock Prairie 700. He took me by 2 quad lengths off the line, but by 60 or so I had caught back up to him. Before he would take me by 5-6 quads every time. So I was happy with the home-made mods... got some additional performance without spending a bundle! Good luck!