P650 crossed first water, belt slip, speedo not reading correct
Mar 20, 2005 | 09:41 PM
#21
Thread Starter
|
Pro Rider
Joined: Feb 2004
Posts: 240
Likes: 0
P650 crossed first water, belt slip, speedo not reading correct
Originally posted by: 589650
I use a kind of silicone grease on my gasket, not sure exactly what it's called but it originally came with a K&N filter, was meant to be used for sealing around the edges of the filter. Seems to work real good, not messy, won't wash out, and doesn't make the gasket stick when you take the cover off.
I use a kind of silicone grease on my gasket, not sure exactly what it's called but it originally came with a K&N filter, was meant to be used for sealing around the edges of the filter. Seems to work real good, not messy, won't wash out, and doesn't make the gasket stick when you take the cover off.
Mar 20, 2005 | 11:19 PM
#22
Thread Starter
|
Pro Rider
Joined: Feb 2004
Posts: 240
Likes: 0
P650 crossed first water, belt slip, speedo not reading correct
The bog still seems to be there, in low range at WOT about 40ish mph. It almost feels like a rev limiter? In high I pull right up to 60 with no issues.
Thread
Thread Starter
Forum
Replies
Last Post
juanmortiz92
Yamaha
0
Jul 21, 2015 04:10 PM
KimSJoh
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
14
Jul 18, 2015 07:20 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
