For the Lakota guys.
#41
For the Lakota guys.
Ahhh the gasket was in horrible shape. Stuck to diffrent sides all over the place and just tore. I ever so gently took it off. But, no go.
The plate that hold the springs in. Was already cracked. Wasnt missing but was cracked. Cracked right through. When I removed the screws (I did each screw at a 2 turn intervale? Dint want to put to much preasure on each corner afriad of causing more damage.)
Little fuzzy but you can see the crack. I dint get a shot with it off. When I had it off. But the pice was completly seperable.
http://putfile.com/pic.php?pic=3/8705535948.jpg&s=x11
This one below you can see the crack on the one that is located in the close upward position.
http://putfile.com/pic.php?pic=3/8705553178.jpg&s=x11
I put everything back in the way its sopose to go. New springs, clutch plates and all that. So when I get the parts it like a 20 min job and I can be done with it. Got em ordered with express shipping from bike bandit.com so hopfully I can get them by weeks end? Or middle next week. We'll see! [img]i/expressions/face-icon-small-smile.gif[/img]
Phyro
The plate that hold the springs in. Was already cracked. Wasnt missing but was cracked. Cracked right through. When I removed the screws (I did each screw at a 2 turn intervale? Dint want to put to much preasure on each corner afriad of causing more damage.)
Little fuzzy but you can see the crack. I dint get a shot with it off. When I had it off. But the pice was completly seperable.
http://putfile.com/pic.php?pic=3/8705535948.jpg&s=x11
This one below you can see the crack on the one that is located in the close upward position.
http://putfile.com/pic.php?pic=3/8705553178.jpg&s=x11
I put everything back in the way its sopose to go. New springs, clutch plates and all that. So when I get the parts it like a 20 min job and I can be done with it. Got em ordered with express shipping from bike bandit.com so hopfully I can get them by weeks end? Or middle next week. We'll see! [img]i/expressions/face-icon-small-smile.gif[/img]
Phyro
#42
#43
For the Lakota guys.
Got the new parts in.
Let the clutch site in some oil for a few. Then installed everything.
Road it night for about 20 let it cool down. Then we went riding around for about an hour.
I dint know how much breakin time or how easy to go on it for how long.
After that amount of time I hammered on it for about 10 min,
it was sweet having a new clutch with the stronger springs in. [img]i/expressions/face-icon-small-smile.gif[/img]
And a clutch that grabs.
Phyro
Let the clutch site in some oil for a few. Then installed everything.
Road it night for about 20 let it cool down. Then we went riding around for about an hour.
I dint know how much breakin time or how easy to go on it for how long.
After that amount of time I hammered on it for about 10 min,
it was sweet having a new clutch with the stronger springs in. [img]i/expressions/face-icon-small-smile.gif[/img]
And a clutch that grabs.
Phyro
Thread
Thread Starter
Forum
Replies
Last Post
Elkaholic
Land, Trail and Environmental Issues
1
09-06-2015 02:44 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)