Kids Quads & Other ATV's - Ask an Expert! An area where experts in their field will answer non-general questions about your Chinese made ATV. mywifesquad, LT80, LynnEdwards and other experts will answer your questions as they have time.

Bombardier 50

Thread Tools
 
Search this Thread
 
  #1  
Old 03-22-2010 | 09:51 PM
jwl0811's Avatar
Thread Starter
|
Weekend Warrior
Joined: Mar 2010
Posts: 5
Likes: 0
Default Bombardier 50

Newbie here with a question. We have a Bombardier 50 that my 5 year old rode into some water. The left front end dropped into a rut and water went up and over the front fender. The motor died, but I was able to restart it after a few minutes. The issue I'm having is that it will idle, but as soon as I give it gas, it bogs down. We have checked the compression, carb, and checked for air leaks but haven't been able to track down the problem. I'm thinking it may be electrical. Any sugestions would be helpful. Thanks
 
  #2  
Old 03-23-2010 | 07:39 AM
LT80's Avatar
Extreme Pro Rider
LT80 Expert
Joined: Mar 2001
Posts: 8,342
Likes: 32
Default

Welcome to the forums.
Please explain "checked the carb".
 
  #3  
Old 03-23-2010 | 04:35 PM
jwl0811's Avatar
Thread Starter
|
Weekend Warrior
Joined: Mar 2010
Posts: 5
Likes: 0
Default

We took the carb apart and cleaned it out, checked the float, ect...
 
  #4  
Old 03-23-2010 | 10:45 PM
LT80's Avatar
Extreme Pro Rider
LT80 Expert
Joined: Mar 2001
Posts: 8,342
Likes: 32
Default

And removed both jets and made sure the lil holes are open?
 
  #5  
Old 03-24-2010 | 08:18 AM
jwl0811's Avatar
Thread Starter
|
Weekend Warrior
Joined: Mar 2010
Posts: 5
Likes: 0
Default

Yes. Ran wire through and blew out with compressed air.
 
  #6  
Old 03-24-2010 | 09:14 AM
LT80's Avatar
Extreme Pro Rider
LT80 Expert
Joined: Mar 2001
Posts: 8,342
Likes: 32
Default

OK, did the stator get submerged? Maybe yuck in the stator.?
That has caused this before.
 
  #7  
Old 03-25-2010 | 10:01 PM
jwl0811's Avatar
Thread Starter
|
Weekend Warrior
Joined: Mar 2010
Posts: 5
Likes: 0
Default

Dont remember checking the stator. Will do so, thanks!
 
  #8  
Old 03-30-2010 | 03:55 PM
jday53's Avatar
Weekend Warrior
Joined: Mar 2010
Posts: 10
Likes: 0
Default

Hi I am new here I have a 05 ds 50 And I am getting spark and fuel but it wont fire I have 70-75 lbs off compression is that enuff I just installed a new jug and piston rings and new gaskets any ideas???? thanks
 
  #9  
Old 03-31-2010 | 08:32 PM
jwl0811's Avatar
Thread Starter
|
Weekend Warrior
Joined: Mar 2010
Posts: 5
Likes: 0
Default

I'm not a mechanic, but I can tell you that the compression in mine is around 120 -130. I don't know if that helps, just letting you know.
 
  #10  
Old 03-31-2010 | 08:34 PM
jday53's Avatar
Weekend Warrior
Joined: Mar 2010
Posts: 10
Likes: 0
Default

Yeah it does help but I still cant figure mine out as I Just put a new top end on this thing should have ooodles of compresion
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ds-newbe
Test Your Signatures (sigs) Here!
0
06-03-2015 05:40 PM
bbehrendt
CAN-AM (BRP)
0
05-28-2015 09:25 AM
AlaskaTRX
CAN-AM (BRP)
23
12-17-2000 09:27 PM
Zorro
CAN-AM (BRP)
8
10-13-2000 07:18 PM
ThreeWheelio
CAN-AM (BRP)
1
09-17-2000 05:07 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: Bombardier 50



All times are GMT -5. The time now is 10:32 AM.