How do you remove the front part of the clutch apart? Ihave the rear apart were the spring is and im gonna get a heavier spring but I need to remove 2 of the rollers and cant seem to find them..


HELP<u>Text</u>[img]i/expressions/face-icon-small-sad.gif[/img][img]i/expressions/face-icon-small-blush.gif[/img][img]i/expressions/face-icon-small-disgusted.gif[/img][img]i/expressions/face-icon-small-happy.gif[/img][img]i/expressions/face-icon-small-mad.gif[/img][img]i/expressions/face-icon-small-happy.gif[/img][img]i/expressions/face-icon-small-disgusted.gif[/img][img]i/expressions/face-icon-small-blush.gif[/img][img]i/expressions/face-icon-small-sad.gif[/img]

 

OMG&gt;&gt;.. You take an impact wrench and remove the front clutch.
Where ya getting a spring?

 

I used a impact and got the nut off but thats all that will come off. the clutch like slides 1/2 inch then stops. is there any place to get a diagram of this? Also what size are these rollers ?

 

Ok, this is normal. More pursuation is required [img]i/expressions/face-icon-small-smile.gif[/img]
The plate in there sometimes gets squeezed on the crankshaft.
You need a repair manual [img]i/expressions/face-icon-small-happy.gif[/img] No online micro-fiche that I know of.
I use suzuki rollers,thus I never cared about the size.

 

Ronnies.com has a micro fisc

 

First I was talking about the weight of the rollers.

Second I found a fiche and see whats all in there.

I got it off and took two out
LT80 I was going to shim out the spring if I cant get one from epi