Sportsman 800 2 " lift
#12
Sportsman 800 2 " lift
Originally posted by: trailbound
I like the looks on Rubberdowns lifts. I think they are the bilitt alloy ones on ebay.
I like the looks on Rubberdowns lifts. I think they are the bilitt alloy ones on ebay.
#13
#14
Sportsman 800 2 " lift
I see you are already engaged in another thread, but will respond. The difference between the 2 is this: The 800 front "pulley" (so to speak) is smaller, this gives a much more low end "gear ratio" just off idle! If you descide to get one, you will need a 800 belt too! Different length will be required, for the "deeper" front "pulley" at idle. I used alot of these: " , to help you understand it like I do! This is a great low end increase mod.
#16
Sportsman 800 2 " lift
I am not for sure on that. I did the 800 primary and the H/C at the same time. To be honest with you, this mod was done before I even rode the quad. So, I have no idea what stock was like, except for the 5 minute test ride on the asphault parking lot before I took it home! As soon as I got it home, the "operating room" was prepared!
#17
Sportsman 800 2 " lift
Originally posted by: Moonshine3030
I have a 07 800 and would like to put a 2 inch lift in it front and back. Any suggestions on what brand to get ....currently looking at one by Xtreme. Also any feedback on how this will affect my CV joints would be appreciated.
Shine
I have a 07 800 and would like to put a 2 inch lift in it front and back. Any suggestions on what brand to get ....currently looking at one by Xtreme. Also any feedback on how this will affect my CV joints would be appreciated.
Shine
Thread
Thread Starter
Forum
Replies
Last Post
Cantbuytime
Buying an ATV
8
08-17-2015 06:33 PM
Cantbuytime
Drivetrain, Suspension & Tires
0
08-16-2015 09:13 PM
MikeyBoyesq
ATV Racing
1
08-10-2015 11:11 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)