2007 Polaris Sportsman 2x 500 H.O. EFI
#21
2007 Polaris Sportsman 2x 500 H.O. EFI
Not sure if this is the same issue. But somebody may find it useful.
My brother's '06 500 developed a similar problem last week. We found that the MAP sensor came loose. The clip holding it down seems a little flimsy and the two scew holes on the sensor do not line up with the holes on the engine. We bent the clip to provide more pressure and it cured the problem.
Good luck
Ebel
My brother's '06 500 developed a similar problem last week. We found that the MAP sensor came loose. The clip holding it down seems a little flimsy and the two scew holes on the sensor do not line up with the holes on the engine. We bent the clip to provide more pressure and it cured the problem.
Good luck
Ebel
Thread
Thread Starter
Forum
Replies
Last Post
bzdok1234
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
30
02-23-2016 01:55 PM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)