Polaris GlacierII whimpy plow frame plate
Mar 31, 2009 | 12:06 PM
#31
Pro Rider
Joined: Apr 2008
Posts: 399
Likes: 0
From: Maine
Mar 31, 2009 | 12:44 PM
#32
Thread Starter
|
Trailblazer
Joined: Mar 2009
Posts: 82
Likes: 0
From: Kingsley, Michigan
It's posted right on Moose's website
Mar 31, 2009 | 12:50 PM
#33
Thread Starter
|
Trailblazer
Joined: Mar 2009
Posts: 82
Likes: 0
From: Kingsley, Michigan
Apr 8, 2009 | 06:41 AM
#35
Thread Starter
|
Trailblazer
Joined: Mar 2009
Posts: 82
Likes: 0
From: Kingsley, Michigan
Polaris / Dealership motto
I belive I was right. The motto for Polaris is "You bought it, your stuck with it SUCKER"
FYI: I believe Michigan Lemon Law Attornneys and Counselors I dealt with couldn't line their pockets enough to take any interest. www.LemonAuto.com is a F***ing joke!
FYI: I believe Michigan Lemon Law Attornneys and Counselors I dealt with couldn't line their pockets enough to take any interest. www.LemonAuto.com is a F***ing joke!
Apr 11, 2009 | 04:59 AM
#36
Thread Starter
|
Trailblazer
Joined: Mar 2009
Posts: 82
Likes: 0
From: Kingsley, Michigan
Finally
After a Major A** chewing my dealership owner decided it was the fault of the Junk self tappers. Common sence prevailed. So my 500 is going back into the shop to have a new brush guard installed at their cost. I WIN!
Last edited by Douginmichigan; Apr 11, 2009 at 05:01 AM. Reason: type-O's
Apr 17, 2009 | 04:22 PM
#37
Thread Starter
|
Trailblazer
Joined: Mar 2009
Posts: 82
Likes: 0
From: Kingsley, Michigan
Polaris Customer Support
Wrote Polaris Custom Support about this idea of changing their Junk self tapping bolts. They sent mt a e-mail back of Thanks. But I really doubt that they ever pass this info on to anyone with this problem. So hopefully this thread will clue others in.
Good Luck Guys
Good Luck Guys
Apr 27, 2009 | 08:16 PM
#38
Weekend Warrior
Joined: Apr 2009
Posts: 4
Likes: 0
2005 sporstman 800
Hi guys,
I just bought a '05 sportsman 800 blown-up. I rebuilt the entire motor basicly, new case, crank, cylinders, cam, lifters, bearings, bushings, and pistons. I put all together going by the polaris service manual for the wheeler last weekend. I finished it and started it up and there was some knocking that i had expected due to the lifters needing to get pumped up with oil. Long be hold the knocking never really went away. I talk to the prevous owner and another guy that has rode these 800's and they both said that it is normal to make the knocking noise. Has anyone else heard of this? Is it normal for the noise? It sounds like a lose rocker arm, but i rember torqureing all the rocker arms. Any help would be much appreciated.
I just bought a '05 sportsman 800 blown-up. I rebuilt the entire motor basicly, new case, crank, cylinders, cam, lifters, bearings, bushings, and pistons. I put all together going by the polaris service manual for the wheeler last weekend. I finished it and started it up and there was some knocking that i had expected due to the lifters needing to get pumped up with oil. Long be hold the knocking never really went away. I talk to the prevous owner and another guy that has rode these 800's and they both said that it is normal to make the knocking noise. Has anyone else heard of this? Is it normal for the noise? It sounds like a lose rocker arm, but i rember torqureing all the rocker arms. Any help would be much appreciated.
Nov 10, 2010 | 06:53 PM
#40
Trailblazer
Joined: Jul 2010
Posts: 60
Likes: 0
I purchased a 2007 500 x2. It came with a plow set up. Looks like a Glacier 2 set up. I dont see how it can be all that flimsy. Looks solid with regular bolts. Can I mount a Promark front brushguard with the plow mount installed as well. I did a little trail riding with the plow mount on it and it did not really bother me. Thanks
