Polaris Discussions about Polaris ATVs.

1995 Xplorer 400 4x4

Thread Tools
 
Search this Thread
 
  #1  
Old 09-22-2009, 08:02 PM
95xplorer's Avatar
Weekend Warrior
Thread Starter
Join Date: Sep 2009
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Default 1995 Xplorer 400 4x4

I have a 1995 Xplorer 400 4x4 and it wont idle to save its life.
When it revs down it will back fire from hell. The Plug is black in color and where the exhaust comes out it is wet and black. The quad will run out pretty good but wont idle. This is my first quad so i dont know much about them. I am mixing it 40:1 .
Please send me some helpful info.
Thanks Daniel
 
  #2  
Old 09-22-2009, 08:56 PM
ftwflh's Avatar
Quad Patrol
Don't let the hp numbers fool you. Its all in how you get it to the ground. Clutching clutching clutching!
Join Date: Apr 2000
Posts: 6,688
Likes: 0
Received 1 Like on 1 Post
Default

do a compression check
 
  #3  
Old 09-23-2009, 08:30 AM
95xplorer's Avatar
Weekend Warrior
Thread Starter
Join Date: Sep 2009
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Default

i will do that later today when it warms up. It is 48 degrees out right now.
 
  #4  
Old 09-23-2009, 11:03 AM
95xplorer's Avatar
Weekend Warrior
Thread Starter
Join Date: Sep 2009
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Default

okay did a compression test and it was about 96psi
what should i do now??
 
  #5  
Old 09-23-2009, 01:41 PM
drlang's Avatar
Pro Rider
Join Date: Mar 2005
Location: Wisconsin
Posts: 1,635
Likes: 0
Received 0 Likes on 0 Posts
Default

Rebuild the top end, new piston, rings, and bore. Good luck Doc
 
  #6  
Old 09-23-2009, 06:39 PM
95xplorer's Avatar
Weekend Warrior
Thread Starter
Join Date: Sep 2009
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Default Engine Pics

I tore the engine apart and this is what i found.
Tell me what you think and what may have caused it.
Where can i get discounted parts for it.
Thanks Daniel



Name:  CIMG1837.jpg
Views: 55
Size:  54.8 KB
Name:  CIMG1838.jpg
Views: 46
Size:  38.8 KB
Name:  CIMG1839.jpg
Views: 49
Size:  43.3 KB
Name:  CIMG1840.jpg
Views: 29
Size:  40.2 KB
Name:  CIMG1841.jpg
Views: 62
Size:  30.7 KB
 
  #7  
Old 09-23-2009, 09:42 PM
ftwflh's Avatar
Quad Patrol
Don't let the hp numbers fool you. Its all in how you get it to the ground. Clutching clutching clutching!
Join Date: Apr 2000
Posts: 6,688
Likes: 0
Received 1 Like on 1 Post
Default

DOnt do discount parts! Go with Wiesco piston kit , factory gaskets(400s dont work well with Cometic or cheaper gaskets) get the piston from the shop that does the boreing.
 
  #8  
Old 09-24-2009, 08:11 AM
95xplorer's Avatar
Weekend Warrior
Thread Starter
Join Date: Sep 2009
Posts: 12
Likes: 0
Received 0 Likes on 0 Posts
Default

should i do a overbore? say like a 1 or 2 mm overbore?
since i am already gonna have it all apart.
Thanks Daniel
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
MeadowlarkFarm
Test Your Signatures (sigs) Here!
3
11-27-2019 08:40 PM
r1pilot83
Utility ATVs
15
11-25-2019 11:39 PM
rockinkgin
Polaris
4
09-25-2015 01:52 PM
MeadowlarkFarm
Polaris
1
09-09-2015 03:08 AM
Jason Richards
Polaris
3
09-04-2015 06:17 PM

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 


Quick Reply: 1995 Xplorer 400 4x4



All times are GMT -5. The time now is 05:31 AM.