polaris xplorer
#11
Tool compartment in the rear.. Cylinder head bolts 18-20 foot pounds. You'll need a new head and base gasket.. You really need a good service manual on this engine,head has to bled after assembly,plus other things to check like counter balance fluid.See if you can download the link I gave you or even this one.Some places you can get them for 5 bucks!
#12
#13
#17
It's there unless someone installed a different type drive shaft?? Dirt Cheap Yamaha, Honda, Arctic Cat & Polaris OEM Parts & Accessories – Cycle Parts Warehouse http://www.cyclepartswarehouse.com/f...1996&fveh=5419 The front carrier shaft has a hole for the pin,isn't shown,but is what locks the drive shaft in. Once the pin is out,drive shaft removed the sprocket can come off. Down load this manual or get one on Ebay.http://gh-ftp.com/ORV%20Manuals/Pola...0All%20Models/
#18
#20
You might be able to form one for the base,but the head gasket is critical on this machine. Cometic gaskets are reasonable along with some others.Just check Ebay,etc. Cometic Top End Gasket Set | ATV | Rocky Mountain ATV/MC http://www.ebay.com/itm/Namura-Top-End-Gasket-Kit-1994-1995-Polaris-400L-400-L-2x4-4x4-6x6-/350601084020?pt=Motors_ATV_Parts_Accessories&hash=item51a173fc74&vxp=mtr