polaris carb
#11
Yes. Pull the gas to line to the carb,pull the vacuum line from the other side of the carb and use a mity vac to pull a vacuum. If the hoses are in good shape,fuel valve is in the on or reserve position and verified not stopped up and you can 't get gas to flow, then it's a fuel pump problem even though you said you replaced one from another machine.If you do have fuel,then sounds like you need to check into the carb again. If you have to tear into the carb again,install a carb kit. No need of going into a carb more than once! Plenty of them on ebay for your model 500.Sportsman 500 carb kits | eBay
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)