Scrambler clutch kit
#1
I'm wanting to gradually put an hpd pipe and clutch kit on, but want to buy in small spurts. So I'm thinking of buying the aggressive clutch kit first...will I notice any performance gains from just the clutch with the aggressive kit and will it run okay with the stock pipe? Thanks for the advice
----------
02 Scrambler 400 X
----------
02 Scrambler 400 X
#2
Well, here's what you will run into. The stock pipe runs around 5750 at peak rpm. The HPD trail pipe runs at 6700-6800 at peak rpm. The clutch kit has to be matched to the pipe. The bike would actually run worse with the aggressive kit and the stock pipe. I would bet it would run better with the trail pipe and a stock clutch setup. If you could locate a set of s-53 weights or 10al weights (53 gram), that would work OK until you bought the whole clutch kit. If you ride quite a bit, I would wait until you bought both, but you could do the second if you had to. Hope this helps,Bubba
#4
if you want to keep the bike stock,some lightly clutch setup changes will give you more snap but no power/speed gains.the pipe and clutch thing is a COMBO that match together the same time to run properly.
Thread
Thread Starter
Forum
Replies
Last Post
fordfaithful21
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
9
Dec 7, 2015 05:52 PM
cdstang
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
2
Aug 31, 2015 07:52 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



