Have a 95 xplorer
Belt deflection is way off, installed new belt, shimmed the primary side clearance, and shimmed the secondary clutch as high as I dare go. Still need to ge the belt tighter.

Is there any movement to be had in the motor, as in snowmobiles that is where the adjustment is made.
I realize that the clutches will have to be re-aligned, but how is the belt deflection adjusted on the ATV????

 

Yes, see this post and check your PM.

 

NC Check your PM.. as that posting doesn't help, as I'm in alignment....

Going to check my CTC and see how far off it is......Never liked the Idea of having to Shim motor mounts, I need to move forward with the motor not side to side..