Z400 ONLY PUSH STARTS
#12
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
Have guted this carb 6 times and cleaned it out. I have blown air through the starter jet and felt it going through the rest of the carb and choke port.
I have run out of ideas of what is going on with this.
Like stated above, if its cold it will just turn over and sound like its trying to fire but wont. If I push it down the driveway and pop the clutch it will fire right up and run fine.
I have run out of ideas of what is going on with this.
Like stated above, if its cold it will just turn over and sound like its trying to fire but wont. If I push it down the driveway and pop the clutch it will fire right up and run fine.
#14
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
when you say the valves are fine, how do you know this?? if the seats are ate up from the sand the only way to tell is by leak down test or by tearing it down. do you have any buds that have the same bike? if so steal the carb and try it. if problem is still there then move on, 6 times apart should have already found a carb problem if one. just fixed 300 ex with too tight of valves, yes would push start and run great, just would not start with starter - wouldn't crank as fast as pushing.
#16
#18
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)