85 to 88 Suzuki LT230S Quadsport help.
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
Yep they assured me it was the right one too. I sent it back I don't want to be bothered with stuff like that. I'm paying good money for something that is supposed to work not be moddified. I also sent the photo of the two headpipes together that i have posted up here along with it. And put a sticky not on it saying "Do these headers look anything alike to you?"
![Huh](https://atvconnection.com/forums/images/smilies/huh.gif)
Anyway, longer studs shouldn't have been an issue... they just screw in n out n couldn't cost more than a few bucks. Oh well... so whats the plan now?
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
![Smile](https://atvconnection.com/forums/images/smilies/smile.gif)
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
Sometimes they can be hard to get out but sometimes they come out when you take the exhaust off when you dont want them to. I guess it just depends. If you take the nut from the other stud and jam the 2 nuts together, it should break the stud loose and screw on out. But if the threads are stripped, that probably wouldn't work. In that case I would use vice grips to get them out and maybe heat the aluminum with a torch (or just ride the quad until it gets hot).
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
![Go Crazy](https://atvconnection.com/forums/images/smilies/go crazy.gif)
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
that was the dg you got? i ordered a dg aluminum from denniskirk and it was a perfect fit. the only issue i had was the bigger header pipe is close to the oil fill cap and im going to have to grind the edges of it down so it doesnt get in a bind taking it out. no real issues. i love mine.