install grease fitting on them,ising a 1/4x28 tap i did mine this way cause i was poping balljoints on every ride WASCHANGIN OUT OLD ONES AS NEEDED TILL THE SECOND ONE BROKE !!!!! its not hard to do
P.s. if you install grease fittings in your front hub ya can have greasable wheel bearings witch i'd have to change often till i put the fitting on ........the more fittings the better mine has ten fittings on it

 

hi if you check out the new pic is that where i can put the fitting?

thanks brian

 

Alright guys i got pics of my monster up!! shes a little rough but a lotta fun

 

The fitting should go on the flat part on the bottom

 

after taking a look at the bike i guess you can prettey much put fitting anywhere where there is greese or? it kinda seems stupid that they dident do that in the first place.

cya brian

 

Monster? Looks good to me. That does sound like a good project name. Every time it fires to life, scream "ITS ALIVE" as loud as you can. Folks will start to wonder what graves youve been raiding.

Is there any plans for some/more modifications to the beast? Or will you run it in its preasent state of tune.

The pics are great. Thanks a bunch for sharing.

BigMc

 

well it still has some problems, like that carb issue and the rear caliper just lost the parking brake arm (it was broke anyway, just hanging there covering up the whole) so i was looking for a parking brake block off, for a warrior as in earlier posts [img]i/expressions/face-icon-small-wink.gif[/img] and i need to find a new steering stem bearing, the 1 at the bottom of the stem cuz its wasted. and finally the plastics! but i have fun on it the way it is.

 

$10 to the first person to name the truck in the background of my 5th pic lol j/k its the "beast" hauler

 

Hi Bigmc how does this sound. either a mod or you or if you want i can do it, go thru the whole thread and copy out only the tips and start a new thread with only the tips. the help thread can be the discussion thread or the question and answer thread and the tip forum only for the tips. that way it will be a lot easier if you are looking for a certain subject. (you wont have to read the whole thread just to find 1 tip [img]i/expressions/face-icon-small-smile.gif[/img] ). what do you think?

laterz brian

 

When you are done with the tip thread, see if one of the moderators will paste it up top?