85 to 88 Suzuki LT230S Quadsport help.
#7291
#7295
It just needs to go in a straight line up a hill, sounds elementery huh?? We'll be lucky to accomplish that! Should be wild, thats for sure!
#7297
These must be a 230E shock, right?
Suzuki 230 LT quadsport rear shock with reservoir nice:eBay Motors (item 170330382279 end time Jun-08-09 12:16:15 PDT)
Suzuki 230 LT quadsport rear shock with reservoir nice:eBay Motors (item 170330382279 end time Jun-08-09 12:16:15 PDT)
#7299
Oh boy, I started digging into my nerf-bar and peg situation today and it didn't take long to realize I'm in pretty rough shape. First of all, would someone glance at their pegs to see if mine look bent. I think the passenger side one might be. Seems torqued a little weirdly.
Secondly, the new 350mm bolt bent like a toy. But this time it wasn't entirely its fault. If you look at the mounting holes for the frame, you will notice the front hole is a nice looking oval shape as opposed to round. I tried threading a bolt in there and I can get it to thread in straight, but obviously when I do that, its leaving that ovaled out area empty which will make it that much easier to bend again. Here's the pics:
So would it work if I JBed the ovaled out area then re-tapped that hole? Since I don't think I have a tapping kit, could I thread the bolt in there, then apply the JB? Any other ideas?
Oh and in case anyone was considering it, don't do a 30ft tabletop with your 230!!
Secondly, the new 350mm bolt bent like a toy. But this time it wasn't entirely its fault. If you look at the mounting holes for the frame, you will notice the front hole is a nice looking oval shape as opposed to round. I tried threading a bolt in there and I can get it to thread in straight, but obviously when I do that, its leaving that ovaled out area empty which will make it that much easier to bend again. Here's the pics:
So would it work if I JBed the ovaled out area then re-tapped that hole? Since I don't think I have a tapping kit, could I thread the bolt in there, then apply the JB? Any other ideas?
Oh and in case anyone was considering it, don't do a 30ft tabletop with your 230!!
#7300