NEW Puget Sound/Seattle/Northwest area riders MEET HERE!!! thread
04-26-2010, 05:12 PM
Extreme Pro Rider
Preach it Brother!!! ;)
Preach it Brother!!! ;)
Join Date: Mar 2005
Location: Warshington
Posts: 2,993
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Mike,
My local Napa guy did some "local" checking for me, too and found one in Portland that will ship to Kent and then to my Arlington store by tomorrow and will only cost $115 so looks like that's a great deal and a heck of alot cheaper than the Napa part price. Stilly Auto Parts is a really good shop. They have helped me with a bunch of different things the last few years.
Thanks again for looking though.
My local Napa guy did some "local" checking for me, too and found one in Portland that will ship to Kent and then to my Arlington store by tomorrow and will only cost $115 so looks like that's a great deal and a heck of alot cheaper than the Napa part price. Stilly Auto Parts is a really good shop. They have helped me with a bunch of different things the last few years.
Thanks again for looking though.
LJ:
Cummins bought out Onan sometime back and I thought I might be able to get you a better price. Fact is they have the thing on the shelf in Portland for $604.00. Just a little high. Checked with another source and found a new one for $137.27 also in Portland, they have three in stock, so UPS could be another ten to fifteen bucks. Same outfit has an outlet in Sea-Tac area but I don't know if they have one on the shelf. If you want this I'd suggest the one from Portland and I could have them drop ship to your residence and you could mail me a check. Should take a couple of days after you decide if you want it.
Let me know.
Mike
Cummins bought out Onan sometime back and I thought I might be able to get you a better price. Fact is they have the thing on the shelf in Portland for $604.00. Just a little high. Checked with another source and found a new one for $137.27 also in Portland, they have three in stock, so UPS could be another ten to fifteen bucks. Same outfit has an outlet in Sea-Tac area but I don't know if they have one on the shelf. If you want this I'd suggest the one from Portland and I could have them drop ship to your residence and you could mail me a check. Should take a couple of days after you decide if you want it.
Let me know.
Mike
04-26-2010, 05:31 PM
Extreme Pro Rider
Being retired is a hoot!
Being retired is a hoot!
Join Date: Mar 2004
Posts: 3,430
Likes: 0
Received 0 Likes
on
0 Posts
Thanks Mike,
My local Napa guy did some "local" checking for me, too and found one in Portland that will ship to Kent and then to my Arlington store by tomorrow and will only cost $115 so looks like that's a great deal and a heck of alot cheaper than the Napa part price. Stilly Auto Parts is a really good shop. They have helped me with a bunch of different things the last few years.
Thanks again for looking though.
My local Napa guy did some "local" checking for me, too and found one in Portland that will ship to Kent and then to my Arlington store by tomorrow and will only cost $115 so looks like that's a great deal and a heck of alot cheaper than the Napa part price. Stilly Auto Parts is a really good shop. They have helped me with a bunch of different things the last few years.
Thanks again for looking though.
Wow, what a range of prices. Makes me wonder about where I get stuff however. Usually they are really hard to beat. May have to look at another source.
Mike
04-28-2010, 05:47 PM
Extreme Pro Rider
Being retired is a hoot!
Being retired is a hoot!
Join Date: Mar 2004
Posts: 3,430
Likes: 0
Received 0 Likes
on
0 Posts
Good Afternoon PSAR!
Cold and windy over this way, temps have been in the high 30's to mid 40's past couple of days. Bound to happen as Little League is in progress. Felt like I needed my heavy winter clothes yesterday.
Put the tiller tractor in the shop for oil change and that kind of thing. Checked the tiller tines and found a ten foot piece of 3/8" pipe wound around the fool thing. Busted the pipe in half as it was wound on both side of the machine. Tough tillers those Bolens. Took an hour to get it all cut loose. Changed the oil in the quad and did the front and rear axle lube as well. Good machine that Kawi, worked the heck out of it and it keeps on ticking.
Hope everyone is having a great day, we're going to baseball practice in a bit. Having the grandsons around sure keeps us busy.
Mike
Cold and windy over this way, temps have been in the high 30's to mid 40's past couple of days. Bound to happen as Little League is in progress. Felt like I needed my heavy winter clothes yesterday.
Put the tiller tractor in the shop for oil change and that kind of thing. Checked the tiller tines and found a ten foot piece of 3/8" pipe wound around the fool thing. Busted the pipe in half as it was wound on both side of the machine. Tough tillers those Bolens. Took an hour to get it all cut loose. Changed the oil in the quad and did the front and rear axle lube as well. Good machine that Kawi, worked the heck out of it and it keeps on ticking.
Hope everyone is having a great day, we're going to baseball practice in a bit. Having the grandsons around sure keeps us busy.
Mike
04-29-2010, 07:55 AM
Elite Pro Rider
Lazy Boy Rider!
Lazy Boy Rider!
Join Date: Jun 2003
Posts: 15,700
Likes: 0
Received 0 Likes
on
0 Posts
04-29-2010, 08:09 AM
Pirate Biker
Limping Rider!
Limping Rider!
Good Morning PSAR
Ride bike today and tomorrow, 104 mile group ride Sunday. Looks like biking weather all next week, weather looks nice. I don't mind riding home in the rain, just not to work, too much trouble trying to dry clothes on the dash of my cab
Hope everybody has a great day
Ride bike today and tomorrow, 104 mile group ride Sunday. Looks like biking weather all next week, weather looks nice. I don't mind riding home in the rain, just not to work, too much trouble trying to dry clothes on the dash of my cab
Hope everybody has a great day