Has anyone installed a DP clutches clutch kit in their warrior? I am going riding tomorrow and need to get this thing together. With the kit there is one friction plate that is narrow for the cushion spring but there is two cushion springs with the stock setup. should I eliminate one of the cushion springs and if so what position should i put the one with the spring, or is something wrong with the kit? Thanks for any help you can give me.

 

I had the same problem when i istalled my ebc kit on my warrior and i just installed those cushin plates the same way they went in with the stock clucth plates. You can just put it back together as if it was stock.

 

Hey Crotts, where did you get that oil cooler and how much?

 

OK thanks, I just left the one spring out, hope it works. I haven't got to try it yet because it was late last night till i got it done. I got my oil cooler from mascman for $60, he is on this forum.

 

How much of a diff. does the oil cooler acually make.

 

I haven't really noticed a big difference, but the cooled oil is sent directly to the crank and they are suggested to be used for mod. motors

 

Nice warrior Crotts. did you buy all that or did it come with most of that stuff.

 

Thanks, when i bought it everything was stock except the swing arm skid plate.