just went to change the oil and the lugnut thing underneath the warrior engine is not moving. I tried wd-40. Tried using a hammer and hitting the rachet so that it would move.. but it didnt. I need to change my oil badly, but the damn lugnut isn't coming off.. what should I do?

 

you put a socket on it and give it the ol' heev ho! left loosy man. take a small hammer and lightly tap on the plug for a minute that sumtimes helps.

 

put a pipe on end of ratchet for extra leverage just make sure sockets on good dont want the nut stripped

 

here's what you do... have a buddy or 2 help.. stand it up on the grab bar and put the socket on.. ( make sure it's a very strong wrench) and then put a LONG pipe on it and just go with it...

 

Use a pipe or a breaker bar stand it up and give it a heav ho

 

if you still cant get it off you can just unscrew the clutch cover and drain it that way. Makes more of a mess but if you take it slow then you should be ok

 

I know a couple of times I had to use a pipe wrench and just get on the outside of the Oil Plug, I even had to do that on my old Wolverine...

 

I dont know about them warrior plugs cuz I had mine do the same thing. I just never tightened it that tight again.