Help ID this old Yamaha
Mar 20, 2020 | 04:44 AM
#12
Elite Pro Rider
Joined: Oct 2013
Posts: 7,465
Likes: 387
From: Lancaster England
Check with any of the on-line parts suppliers like https://www.yamahapartshouse.com/oem...er-yfu1w-parts then check if whatever you need has the same part number on another circa 1989 Yam. I always thought they were 350s and they are not that rare, I often see them on UK eBay, forerunner to the Rhino, they would have sold better if they had been 4WD.
Aug 21, 2020 | 02:30 PM
#13
Weekend Warrior
Joined: Aug 2020
Posts: 1
Likes: 0
Looks very much like the 350cc big bear but the ext version 1988 to 1989
I picked this up earlier today but not real sure what it is. Thought it was a custom job at first but after inspection I'd say it's a factory model. The motor has 229 cm cast into it so I'm thinking 225 or 250 shaft drive. It has high, low and reverse on a hand shifter and looked to be 4 or 5 gears on a foot shifter.
It's missing quite a few parts but might be able to put it back together if I can find out what it is and if there's another model that's simillar. It needs a carb, throttle cable and pull start assembly. Top end is most likely full of dirt, so will need a rebuild.
It's missing quite a few parts but might be able to put it back together if I can find out what it is and if there's another model that's simillar. It needs a carb, throttle cable and pull start assembly. Top end is most likely full of dirt, so will need a rebuild.
Thread
Thread Starter
Forum
Replies
Last Post
ATVC Correspondent
Classifieds, Garage Sale & Swap Shop
0
Sep 23, 2015 06:23 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)