HEY , guys im new here.


i have a 96 warrior and im going to rebiuld the motor.

i need to know a few thing- after im done putting the head back on. what do i need to line up to make the timing right?

thanks for your help.

 

Buy a service manual for your warrior it shows about everything you need to know. BG.

 

welcome to the forums.

 

Nemisis,

Get the Clymer(spelling?) manual. It is WELL worth the $25 and will answer all your questions.

Money well spent!

ER
__________________________________________________ ____________

Only you can prevent environmentalism.

 

i know the clymer manuel is well worth it but i just wanted to know if anyone knew off the top of there head so i didnt have to spend the money.

im 15 and money is kinda tight. thanks again

 

Hi, Sent you a Private Message, let me kno what you need.

 

im not too sure how this thing works, but i think i sent you one back. thanks

 

Ok, you will need to have the timing gear set on the cam. There is a mark on the gear and the head. You will need to align those marks. Slide the chain round the gear and around the crank gear. Also on the crank there is a mark on the gear and on the block. Align them. There ya have it.