Banshee clutch replacement. Help please
#11
Banshee clutch replacement. Help please
I have ran the EBC in both my Banshee's with motor work, and the 250R and have no problems. When you replace the clutch in your bike, leave out the rubber o-rings, commonly known as "cushions". I use 3 original springs and 3 HD springs that come in the kit, it grabs really good and and doesn't tire-out your arm. I also use a MSR "raptor" clutch lever assembly, it reduces the pull by 325%, now it feels like your riding with a clutch from a xr50, but it grabs.
#12
#13
Banshee clutch replacement. Help please
DaBeechMan, more than likely you have alot more work done to your motor than I had to my 250R, which I don't doubt that you smoked the clutch.
Also, are you running that MSR "Raptor" assembly lever on a 250R or a Banshee? The 250R's still pull harder than hell, especially if you run all stiff springs, But on a Banshee....oh yeah...it's alot easier.
Also, are you running that MSR "Raptor" assembly lever on a 250R or a Banshee? The 250R's still pull harder than hell, especially if you run all stiff springs, But on a Banshee....oh yeah...it's alot easier.
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)