What did I do wrong?
#1
I put my raptor together tonight and when I tryed to start it up it would turn over a little and then the single black wire in the harness started to smoke, i t does start it I pull start it so what could be wrong?
#4
Make sure your wiring is right, I assume you had the motor out?
When hooking all the plugs back up at the back end of the tank I believe there is a white set and black set that will plug black/white and white/black
Make sure they are black/black and white/white
I aint 100% sure, but its something to check
When hooking all the plugs back up at the back end of the tank I believe there is a white set and black set that will plug black/white and white/black
Make sure they are black/black and white/white
I aint 100% sure, but its something to check
#7
ya at first I thought that was the problem so I cleaned it off and it seemed a little bettter but not good enough
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)



