Tao Tao overcharging
#22
#23
Which bolts spinner to motor ?
Hi I am trying to fit a 27 mil Kabhi to my 110 mL Teo Teo quad bike and need a manifold spinner to make it fit but after receiving my spinner I can’t work out how to fit the manifold on top of the spinner without hitting the bolts that join the spinner to the block any advice would be very much appreciated
#24
I solved the problem of overcharging
bought this from the net for Christmas last year for grandkids, it has cooked 3 batteries. Under warranty sent stator and reg....didn't help 2 regulators later still over charging. at idle 13 volts has idle goes up peaked at 17.8 volts...unplug regulator stops charging. any help would be Appreciated
Input negative is from the chassis
The output negative on the regulator is not connected.
Cut the red wore exiting the regulator. Connect the input positive on the regulator to the red wire exiting the rectifier. Connect the output positive to other end of the red wire you vut
Thread
Thread Starter
Forum
Replies
Last Post
DumbDad
1) Engine problems..
13
06-21-2021 02:18 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)