650 belt
#2
#3
#4
![Default](https://atvconnection.com/forums/images/icons/icon1.gif)
black spring does not change deflection. It reduces belt wear and slippage.
Removing .1mm(.004) of shim tightens the belt 1.3mm (.051")
If you have a .6mm (or .8mm) shim remove it (put black spring in at same time) and check the deflection. 6 times .051 =~ .3.
So, 1.25-0.3 is 0.95". That is just the manual's rule of thumb stuff.
It almost appears that kawi left us in the cold without much more adjustment left in our pulleys. But, we can use the 360 belt which is wider in case the adjustment can't be made with a 650 belt. Hopefully gates will make us belts that are just a sliver wider than the kawi 650 belt.
Removing .1mm(.004) of shim tightens the belt 1.3mm (.051")
If you have a .6mm (or .8mm) shim remove it (put black spring in at same time) and check the deflection. 6 times .051 =~ .3.
So, 1.25-0.3 is 0.95". That is just the manual's rule of thumb stuff.
It almost appears that kawi left us in the cold without much more adjustment left in our pulleys. But, we can use the 360 belt which is wider in case the adjustment can't be made with a 650 belt. Hopefully gates will make us belts that are just a sliver wider than the kawi 650 belt.
Thread
Thread Starter
Forum
Replies
Last Post
Jeff Roper
Polaris Ask an Expert! In fond memory of Old Polaris Tech.
1
02-01-2022 11:48 AM
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)